Wear Liner Welding Wire & Wear Plates

All Categories

Wear Liner + Welding Wire + Wear Plate | Alloyed Abrasion Defense System

End-to-End Wear Protection! Hardfacing welding wire for repairs, chromium carbide wear plates for fabrication & bolt-on liners for chutes/crushers. Free Welding Guide + Liner Quote!

Get A Quote

Advantages of Wear Liner Welding Wire Wear Plate

10X Extended Service Life

Engineered with chromium carbide overlay or ceramic-enhanced surfaces, our liners resist extreme abrasion and impact – slashing replacement frequency by 90% and cutting long-term costs.

Custom-Engineered for Perfect Fit

Precision laser-cut and formed to your equipment’s exact dimensions (crushers, chutes, hoppers), eliminating gaps that cause material buildup and premature failure.

Bolt-On Rapid Replacement

Pre-drilled holes and standardized mounting systems enable swap-outs in under 2 hours – minimizing production downtime during maintenance cycles.

Smart Surface Technology

Directional weld patterns and ultra-smooth finishes reduce material adhesion by 70%, optimizing flow in bulk handling systems while preventing clogging.

Premium Wear Liner Welding Wire & Wear Plates | High-Performance Hardfacing Solutions for Extreme Abrasion

VIEW DETAILS

HP100 (Low stress abrasive wear )

VIEW DETAILS

HP400 (Resistance to strong impact abrasive wear)

VIEW DETAILS

Chromium Carbide Hardfacing Welding Wear Coal Hopper

VIEW DETAILS

Chromium Carbide Hardfacing Welding Overlay Wear Liner

Chromium Carbide Hardfacing Welding Overlay Wear Liner refers to the various linings made by wear-resistant steel plates through cutting, bending deformation, drilling, welding and other production processes, such as conveyor linings, coal feeder floor / cyclone separator cone and lining board, wear-resistant blades, etc., wear-resistant life can be increased by more than 15 times than ordinary steel.

Chromium Carbide Hardfacing Welding Overlay Wear Liner the chemical composition of the high wear resistance alloy layer contains 4 to 5% carbon and 25 to 30% chromium.

The volume fraction of Cr7C3 carbide in the metallographic structure reaches more than 50%, and the macro hardness is HRC58 to 63.

The hardness of chromium carbide is HV1400 ~ 1800, which is higher than the hardness of quartz in sandstone HV800 ~ 1200.

Since carbides are distributed vertically in the direction of wear, even when compared with casting alloys of the same composition and hardness, the wear resistance is more than doubled.

FAQ

Why are there so many cracks?

Due to the cooling rates of dissimilar metals. Our hard facing plate for coal chute liner is manufactured by welding which results in high temperatures. During the cooling, the plate goes through a stress relieving which is a natural process and does not effect the performance of the plate. The stress relief cracks should be between 3/4" - 2" apart. The cracks can be touched up by our chrome carbide welding rod.

What is the best method of attachment?

Hard facing plate for coal chute liner is usually attached by countersunk bolts, welding studs, perimeter welding, or plug welding. Some methods are better suited than others depending on the specific application. For more detail on each method see the installation section.

Can hard facing plate for coal chute liner be drilled or machined?

Hard facing plate for coal chute liner cannot be machined or drilled. It can however be ground. Mild steel inserts are used to create countersunk or counter bored holes. hard facing plate for coal chute liner can be cut using plasma, Grinding wheel saw, or air-arc gouging.

MOQ?

Our product has no limit to quantity, it can be ordered according to customer requirement.

Our Latest News Display

Jul

Wear Resistant Steel Plates vs Regular Steel: What’s the Difference?

Jul

Top 5 Applications of CCO Plates in Mining, Cement, and Steel Industries

Jul

The Role of Chromium and Carbon in Hardfacing Wire Alloys

Jul

Common Mistakes When Installing CCO Plates—and How to Avoid Them

What Our Clients Are Saying

Marco T.

These chromium carbide overlay liners doubled our cone crusher’s lifespan to 18+ months. Bolt-on design cut replacement downtime by 80% – no welding needed!

Dr. Priya S

Impact-resistant conveyor skirt liners with ceramic inserts lasted 4X longer than our old manganese steel. Shredder debris just slides right off now.

Get a Free Quote

Our representative will contact you soon.

Name

Company Name

Message

0/1000

chute wear liners

wear liners

liner wear

wear resistant liner

wear liner welding wire wear plate

Why Choose Us

Hard-plate® is an high-tech enterprise specializing in metal matrix hard-face wear resistant steel plate and wear resistant material manufacture. Relying on domestic famous institute, Hard-plate® researches and develops wear resistant material and hardfacing welding machine independently, passed the ISO quality mangement system, have dozens of own technologies, got rewarded as high-tech enterprise in 2007 and gained national innovation funds in 2010. Now, Hard-plate® has become domestic famous enterprise.