Description:
Hardfacing flux cored welding wires include self-shielded (open arc), gas-shielded and submerged arc flux cored wires for rebuilding, hardfacing, cladding and fabrication, with diameters from 1.6 mm to 3.2 mm (2.4 mm mainly for submerged arc; 2.8 mm and 3.2 mm are the most cost-effective general-purpose open-arc sizes). The HP series provides a complete three-step solution for wear part manufacturing and repair: buffer / build-up wires (HP1996, HP2022 - high manganese low carbon or high nickel), middle transition wire HP100Mo, and covering wires (HP143 for high temperature wear). With the precipitation strengthening effect of Cr and W and low carbon design, the deposited metal shows excellent tempering and wear resistance and maintains strength and hardness at high temperature thanks to dispersed carbides. HP100Mo is a high chromium, high boron alloy tubular open-arc wire with deposited hardness ≥60 HRC, suitable for abrasive wear under low stress and low impact conditions, and is the standard wire for CCO wear plate production lines. Supplied in 250 kg airtight POP drums; welding electrodes are also available.
Specifications:
PROJECT |
SPECIFICATIONS |
PROJECT |
SPECIFICATIONS |
Brand / Type |
HP100Mo (middle transition) |
Standard category |
EN 14700 T Fe 16 |
C |
4.5 - 6.0 % |
Cr |
25.5 - 28.5 % |
Si |
0.5 - 2.0 % |
Mn |
0.5 - 2.0 % |
Mo |
1.0 - 1.3 % |
P / S |
≤0.04 % / ≤0.04 % |
Fe |
Balance |
Deposited hardness (open arc) |
≥60 HRC |
Diameter |
Φ2.8 mm (2.4 / 2.8 / 3.2 mm available) |
Packing |
250 kg airtight POP drum |
Applications:
CCO wear plate production lines (open arc); rebuilding and hardfacing of grinding rollers and grinding tables of vertical mills, sinter crushers, single tooth rollers, screw conveyors, fan impellers and other wear parts; buffer / transition / covering three-layer systems for heavy rebuild of mill rollers.
Advantages:
1. Deposited hardness ≥60 HRC (HP100Mo open arc) with excellent abrasion resistance under low-stress sliding wear.
2. Cr-B alloy system with dispersed carbides: good tempering resistance, hardness maintained at elevated temperature.
3. Complete three-step wire system (build-up / transition / covering) for professional rebuild of heavy wear parts.
4. Stable welding performance and good bead appearance; suitable for open-arc, gas-shielded and submerged arc processes.
5. 250 kg airtight POP drum packing protects the flux from moisture; complying with EN 14700 T Fe 16 category.
FAQ:
1. Q: What is the difference between self-shielded (open arc) and gas-shielded flux cored wire?
A: Open-arc wire needs no shielding gas and suits on-site and production-line CCO plate manufacturing; gas-shielded wire gives better bead appearance for semi-automatic work.
2. Q: Which diameter should I choose?
A: 2.8 mm and 3.2 mm are the most cost-effective open-arc sizes; 2.4 mm is mainly for submerged arc; 1.6 mm for finer control.
3. Q: What hardness does HP100Mo deposit?
A: Deposited hardness ≥60 HRC (open arc, per material certificate).
4. Q: How is it packed?
A: 250 kg airtight POP drums, 1 drum per carton; other packings on request.
5. Q: Can you supply a matching three-layer solution for roller rebuild?
A: Yes: HP1996/HP2022 build-up + HP100Mo transition + HP143 covering, matched to your base material and working temperature.