All Categories
CCO Wear Plates
Home> Products >  CCO Wear Plates

Chromium Carbide Overlay CCO Wear Plate Bimetal Hardfacing Abrasion Resistant Composite Steel Plate for Cement Mining Power Plant Coal Handling

HRC 58-62 chromium carbide overlay on Q235B/S235JR base, 4-8x longer life than AR500 (ASTM G65); cut-to-size, drilled, bent and stud-welded liners for chutes, hoppers, crushers and cyclones

Product Description

Description:

Chromium carbide overlay (CCO) wear plates, also known as bimetal wear plates, hardfacing plates, chromium carbide cladding plates and composite abrasion resistant steel plates, are produced by open-arc flux cored hardfacing welding on carbon steel base plate (Q235B/S235JR/ASTM A36). Standard sizes are 1500 x 3000 mm and 1200 x 2400 mm with total thickness combinations of 6+4, 6+6, 8+6, 10+10, 10+20 and 12+6 mm, and custom sizes on request. The overlay hardness is HRC 58-62 with dispersed chromium carbide (Cr7C3) phases, giving 4-8 times longer service life than AR500/NM500 steel under ASTM G65 abrasive wear conditions. CCO wear plates are widely used for chute liners, hopper liners, crusher liners, cyclone liners, mill liners, screen plates, grizzly bars and coal handling systems in cement plants, steel mills, mines, ports, coke plants and power plants. Plates can be plasma cut, drilled, countersunk, bent, rolled and stud-welded into fabricated wear liners. Shenyang Hard Tech Products Co., Ltd. exports CCO wear plates to South Korea, Peru, Russia, Chile, Pakistan, UAE, Oman, Australia, Canada and other markets.

Specifications:

PROJECT

SPECIFICATIONS

PROJECT

SPECIFICATIONS

Total thickness

12.0 mm ±0.5 (6+6 reference)

Overlay macro-hardness

HRC 58-62 (≥57 guaranteed)

Base plate

Q235B / S235JR, 6 mm nominal

Abrasion resistance

≈4-8 x AR500 (ASTM G65)

Plate size

3000 × 1500 mm, ±2 mm

Max. service temp.

400 °C cont. / 500 °C interm.

Overlay thickness

6 mm nominal (deposit 4 mm)

Flatness

≤3 mm/m

Bond

Metallurgical fusion, no separation

Check cracks

Permitted (stress relief) / no through-cracks

Weight (12 mm)

423.9 kg/pc (3000×1500)

Warranty

12 months against material defects

Applications:

CCO wear plates are mainly used in high-abrasion sliding and impact applications: coal transfer chutes and belt liners at port terminals, sintering plant crusher liners, cement mill and separator liners, cyclone and dust handling liners, blast furnace bell liners, and excavator bucket liners. Standard plates are cut and fabricated into wear liners per customer drawings, with countersunk holes, weld studs or paste bonding for quick replacement.

Advantages:

1. 4-8x longer service life than AR500/NM500 (ASTM G65 comparative), low lifetime cost and fewer shutdowns.
2. HRC 58-62 overlay with metallurgical fusion bond - no separation under bending or impact; check cracks are stress-relief cracks, through-cracks not permitted.
3. Full fabrication service per drawings: plasma cutting, drilling, countersinking, bending, rolling and stud welding.
4. Strict QC: EN 10204 3.1 MTC for base plate, HRC test on each lot, dimensional report; third-party inspection (SGS/BV/Intertek) supported.
5. 12-month warranty against material defects; seaworthy ISPM-15 pallets with VCI protection.

FAQ:

1. Q: Are the surface check cracks defects?

A: No. Check cracks on the overlay surface are stress-relief cracks required by the process; they release welding stress and stop within the overlay. Through-cracks that penetrate to the base plate are not permitted.

2. Q: What thickness combinations are available?

A: Common combinations are 6+4, 6+6, 8+6, 10+10, 10+20 and 12+6 mm (base + overlay). Other combinations and sizes up to 3000 x 1500 mm can be produced per request.

3. Q: Can you cut and fabricate per our drawings?

A: Yes. We provide plasma/laser cutting, drilling, countersinking, bending, rolling and stud welding to turn plates into finished liners per your drawings.

4. Q: What is the maximum service temperature?

A: 400 degrees C continuous, 500 degrees C intermittent. For higher temperature, heat-resistant base steel and modified overlay solutions are available.

5. Q: How do you guarantee quality?

A: Base plate MTC EN 10204 3.1 with heat number traceability, macro-hardness (HRC) test on each lot, dimensional inspection report, and third-party inspection (SGS, BV, Intertek) can be arranged at buyer's cost.

6. Q: What is the lead time and packing?

A: Normally 25-30 days after PO and advance payment. Export seaworthy steel/wooden pallets (ISPM-15 fumigated) with VCI interleaved protection.

7. Q: What is the abrasion test standard?

A: ASTM G65 dry sand rubber wheel test is used for comparative evaluation; our overlay shows about 4-8 times longer life than AR500 depending on conditions.

Get a Free Quote

Our representative will contact you soon.
Name
Email
Tel / WhatsApp
Company Name
Message
0/1000

Fabrication

Bolted Wear Plate Sample Bolted Wear Plate Sample
Curved Hardfacing Wear Plate Curved Hardfacing Wear Plate
Flat Wear Plates Flat Wear Plates
Curved Wear Plates Curved Wear Plates

Application

R&D ABILITY

1.Liaoning high-tech enterprise and MIIT wear-resistant overlay welding demonstration center
2.Holder of 50+ national patents, including invention patents
3.Advanced in-house lab with full material testing and analysis equipment
4.Contributor to DL/T power industry wear-resistant pipe standards
5.Member of China Welding Association
6.Industry–university–research partner of Liaoning Petrochemical University

Contact us today to discuss your application and get a tailored solution.

Get a Quote

Get a Free Quote

Our representative will contact you soon.
Name
Email
Tel / WhatsApp
Company Name
Message
0/1000
image

More Faq Us

Frequently Asked Questions?

Due to the cooling rates of dissimilar metals. Our hard facing plate for coal chute liner is manufactured by welding which results in high temperatures. During the cooling, the plate goes through a stress relieving which is a natural process and does not effect the performance of the plate. The stress relief cracks should be between 3/4" - 2" apart. The cracks can be touched up by our chrome carbide welding rod.

hard facing plate for coal chute liner is usually attached by countersunk bolts, welding studs, perimeter welding, or plug welding. Some methods are better suited than others depending on the specific application. For more detail on each method see the installation section.

hard facing plate for coal chute liner cannot be machined or drilled. It can however be ground. Mild steel inserts are used to create countersunk or counter bored holes. hard facing plate for coal chute liner can be cut using plasma, Grinding wheel saw, or air-arc gouging.

Our product has no limit to quantity, it can be ordered according to customer requirement.

chromium carbide overlay cco wear plate bimetal hardfacing abrasion resistant composite steel plate for cement mining power plant coal handling-4

Address

No. 1, Zhongxing East Second Street, Shenfu New Zone, Fushun City, China

chromium carbide overlay cco wear plate bimetal hardfacing abrasion resistant composite steel plate for cement mining power plant coal handling-6

Tel

+86-15041317415

"

Welcome your inquiry, we will reply you within 12 hours after receiving the email

Get a Free Quote

Our representative will contact you soon.
Name
Email
Tel / WhatsApp
Company Name
Message
0/1000

Copyright © Shenyang Hard Welding Surface Engineering Co., ltd.  -  Privacy policy