Description:
Chromium carbide overlay (CCO) wear pipes and fittings, also called bimetal clad abrasion resistant pipes, hardfaced steel pipes and wear resistant pipe fittings, combine a carbon steel outer pipe with an inner chromium carbide overlay liner of HRC 58-62. Straight pipes, elbows, bends (long radius CLR and short radius CSR), reducers, tees, half pipes and cone sections are fabricated per customer drawings. The overlay with dispersed chromium carbide phases provides 4-8 times longer service life than ordinary steel pipes under sliding abrasive wear (ASTM G65 comparative), and withstands continuous service temperature up to 400 degrees C. CCO wear pipes are widely used for slurry pipelines, coal injection lines, ash and dust handling ducts, cyclone feed lines, port coal transfer systems and mining wear protection. Ends can be prepared with welding bevels or flanges for easy installation. Shenyang Hard Tech Products Co., Ltd. exports CCO wear pipes and fittings to Japan, South Korea, Egypt, Oman, Spain and other markets.
Specifications:
PROJECT |
SPECIFICATIONS |
PROJECT |
SPECIFICATIONS |
Base pipe |
Q235B carbon steel (per drawings) |
Overlay hardness |
HRC 58-62 |
Overlay location |
Inner wall (outer overlay optional) |
Overlay thickness |
4-8 mm typical, per drawings |
Fittings |
Elbow / bend (CLR, CSR) / tee / reducer / half pipe |
Fabrication standard |
GB/T 12459 / ASME B16.9 practice |
End preparation |
Welding bevel or flanged |
Max. service temp. |
400 °C cont. / 500 °C interm. |
Wear performance |
≈4-8 x ordinary steel (ASTM G65) |
Warranty |
12 months against material defects |
Applications:
Mainly used in pipelines conveying strongly abrasive media: mine slurry and tailings, pulverized coal injection, sinter and coke fines, fly ash and dust ducts, cyclone feed and discharge lines, coal transfer chutes at ports. Especially suitable for elbows and bends where directional change accelerates erosion wear.
Advantages:
1. Inner HRC 58-62 chromium carbide overlay resists sliding abrasion and erosion, 4-8x life vs ordinary pipe.
2. Full range of fittings per drawings: elbows/bends (CLR & CSR), tees, reducers, half pipes, cones.
3. Metallurgical fusion bond between overlay and base pipe, no lining separation.
4. Welding bevel or flanged ends for quick installation and replacement.
5. 12-month warranty against material defects; seaworthy export packing.
FAQ:
1. Q: What pipe sizes can you produce?
A: Diameters and wall thicknesses are produced per customer drawings; common base pipe is Q235B carbon steel with 4-8 mm inner overlay. Please send your size list for confirmation.
2. Q: Is the overlay on the inside or outside?
A: Standard is inner-wall overlay for conveying abrasive media; outer-side overlay can also be made for special applications.
3. Q: What standards are used for elbows and reducers?
A: Fabrication follows GB/T 12459 / ASME B16.9 dimensional practice (1.5D long radius, 1.0D short radius) or your specified drawings.
4. Q: How are the ends prepared?
A: Welding bevels per standard or flanged ends on request.
5. Q: What is the wear performance compared with ceramic lined pipe?
A: CCO pipe performs better under combined abrasion and impact; ceramic lining suits pure fine-particle erosion. We can recommend based on your media and velocity.