- Home
-
Products
- Wear Pipe And Elbow For Engineering Machinery Industry
- Wear Pipe And Elbow For Port Industry
- Wear Pipe And Elbow For Glass Industry
- Wear Pipe And Elbow For Iron And Steel Industry
- Wear Pipe And Elbow For Power Industry
- Wear Pipe And Elbow For Cement Industry
- Wear Pipe And Elbow For Mining Industry
- Wear Plate For Engineering Machinery Industry
- Wear Plate For Port Industry
- Wear Plate For Glass Industry
- Wear Plate For Iron And Steel Industry
- Wear Plate For Power Industry
- Wear Plate For Cement Industry
- Wear Plate For Mining Industry
- welding wire
- Wear Parts Rebuild And Manufacture
- Wear Component And Fabrication
- News
- Case
- Factory Show
- Contact Us
- About Us
Hard-Plate Bimetal Abrasion Resistant Pipe with Chromium Carbide Overlay
Abrasion resistant chromium carbide overlay pipes and elbows are designed for use in applications where severe abrasion in combination with moderate impact and heat occurs in the inner diameter of pipes or elbows. Hard-plate made utilizing an overlay process that involves open arc deposition of chromium carbide in a manganese and steel matrix. One pass on the inner pipe surface yields 60RC while two passes yield a surface hardness of 63RC. The overlay is rated to be stable at 800°C and a special high temperature version, a available down to a 2 inch diameter and is applied spirally to avoid seams that are parallel to the direction of the material flow.
- hard-plate
- China
- depend on quantity
- 6000 Tons
Details
Product Descripition
Caster wear pipe is a bimetal pipe made of seamless steel base pipe onto which chromium carbide overlay is welded with an open arc process. We use an oscillating table with one welding head to arc weld the chromium carbide to the internal of the pipe. We can handle diameters from 6" up to 24" after which we fabricate the pipe from our Chromium Carbide Overlay Plate. The overlay is deposited perpendicular to the flow of material through the pipe resulting in a longer wear life.
Material: CCO overlayer
Manufacturer :Yes
Brand | Haweir (Hard-plate) |
Base Plate | Q235/2345 |
Hardfacing Layer | High chromium high carbide overlay |
Chemical Composition | C(%):3-5 Cr(%):20-26 |
Hardness | HRC58-63 |
Surface Treatment | Hardfacing, clading,coated |
Minimum Inner Diameter | 80mm |
Wear Resistance | High wear resistance |
Thickness | 4+4,5+5,6+5,8+5,8+8,10+8,10+10...etc |
Place of Origin | China |
Application | Mining, Steel,Cement,Power,Port,Glass,Engineering Machinery,etc. |
Company profile
Chromium Carbide Pipe and Bend Manufacturer-We specialize in manufacturing chromium carbide wear pipes and bends known for their exceptional wear resistance and long service life.
R & D ABILITY
We collaborate with academic institutions and research organizations to tap into their expertise and knowledge, enhancing our R&D capabilities and driving continuous improvement in our products.
We leverage data analytics and simulation techniques to optimize the performance and efficiency of our chromium carbide stainless steel pipes and bends, delivering products that offer superior reliability and durability.
customer visit
Quality:
If the quality didn't match your expectation, you can ask us for refund or you can ask us to send replacements to you.
You're welcome to visit us for inspection purpose. Every customer is too valuable for us to lose. Being honest is the best way to keep our business humming.
Wear Elbow:
Our Chromium Carbide Overlay Elbows are welded with the same material. Overlay is deposited in either a single pass application which is 1/8" to 3/16" thickness or a double pass application which is 1/4" to 3/8" in thickness. Wear life of our Overlay Pipe can be up to 15 to 1 over standard wear pipe. The longer wear life of our products reduce maintenance hassles, costly down time, and material loss.
Wear Pipe types
1.Steel pipe with regular base material + overlay, pipes are welded using oscillating table with one welding head to arc weld the chromium carbide to the base material.
2.Bending the wear plate into round pipe.
3.Assembling the wear plate into square pipe.
automatic welding, metallurgical bonding, available to weld the minimum pipe diameter of 80mm and maximum pipe length of 3000mm.
Wear Elbow types
1.Weld directly on the elbow wall
2.wear plate used to make joint form
Product Tag
Get the latest price? We'll respond as soon as possible(within 12 hours)