Communicate with Supplier? Supplier
suki Ms. suki
What can I do for you?
Contact Supplier

SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD

Home > News > SA1750CR Metal Overlay Abrasion Resistant Plates

SA1750CR Metal Overlay Abrasion Resistant Plates

2020-09-11
SA1750CR metal overlay abrasion resistant plates set the industry standard worldwide for controlling abrasive wear. All the metal alloys used in the creation of SA1750CR metal overlay plates are custom blended, enabling quality control from start to finish.

SA1750CR is a Chromium Carbide Overlay plate consisting of hypereutectic matrix with up to 40% chromium carbides that are metallurgically fused to an appropriate steel substrate.

SA1750CR metal overlay abrasion resistant plates have outperformed competitor products in various mining applications including:
Truck bed liner systems
Dozer blade liner systems
Front end loader liner systems
Shovel bucket liner systems and rebuilds
Drag line liner systems
Drag line pins and bushings
Chutes and SA1750CR piping systems
Hammers, breaker plates and augers
For instance, in the case of truck bed liner systems, SA1750CR chromium carbide overlay wear plates take extreme impact inside of a truck bed without damaging the integrity of the plate.

In dozer blade liner systems, SA1750CR chromium carbide overlay wear plates have low coefficient of friction and allow for a much faster push, which increases productivity. This smooth package eliminates material hang-up on the blade surface, which reduces fuel consumption and saves on fuel costs.

The SA 1750CR has a very smooth surface that is highly abrasion resistant and prevents material hang-up on front end loader liner systems.

The SA 1750CR metal overlay plates play a key role in shovel bucket liner systems and rebuilds.

Magnetic particle inspection needs to be performed to identify cracks that cannot readily be detected through visual inspection. The inside cheek, outer sidewall and the scroll of the bucket can be stripped of the worn strips and replaced with large continuous plates of SA1750CR, providing fewer seams for wear, enhancing the material flow and allowing less material to stick to the bucket surface.

SA1750CR provides a long service life for drag line liner systems with its superior abrasion resistant qualities and ability to withstand high impact.

New and rebuild drag line pins and bushings are available from SAS Global Corp through Advanced Material Technologies.